4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 47
Tunnel – Serial Settings Page
If you click Serial Settings at the top of one of the Tunnel pages, the Tunnel – Statistics
page appears. This page shows the settings for the tunnel selected at the top of the page
and lets you change the settings. If you change the Buffer Size value, the EDS4100
must be rebooted for the change to take effect. Changing the other values does not
require a reboot.
Under Current Configuration, Buffer Size has a Reset link that lets you reset the buffer
size value shown. If you click this link, a message tells you that you will have to reboot
the EDS4100. Click OK to proceed or Cancel to cancel the operation.
Figure 4-13. Tunnel – Serial Settings Page
To Next Page
Loading...
Need help?
General