Lantronix EDS4100 User Manual

4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 117
Table 4-36. System Page
System Page
Settings
Description
Reboot Device
Click the Reboot button to reboot the EDS4100. When the EDS4100
reboots, refresh your Web browser and redirect it to the IP address
for the EDS4100.
Restore Factory
Defaults
Click the Factory Defaults button to return the EDS4100 to its
factory-default configuration. Appendix C identifies the factory-
default configuration. If you restore the factory default configuration,
the EDS4100 reboots automatically.
Upload New
Firmware
Lets you update the EDS4100 firmware. Do not power off or reset
the EDS4100 while uploading new firmware. Once the upload has
completed and the new firmware has been verified and flashed, the
EDS4100 reboots automatically. For instructions about upgrading
firmware, see 5: Updating Firmware on page 118.
Name Enter the short name and long name for the EDS4100. Default short
name is EDS4100 and default long name is Lantronix EDS4100.
Change Time
Settings
Lets you specify the system time zone, date, and time. After
changing any of these settings, click the Submit button next to the
field to accept the change.

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English