4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 46
Tunnel Pages
The Tunnel page lets you view and configure settings for up to four tunnels. To view or
specify configuration settings for a tunnel, click Tunnel 1, Tunnel 2, Tunnel 3, or Tunnel
4 at the top of the page. After you select a tunnel, you can click Statistics, Serial
Settings, Start/Stop Chars, Accept Mode, Connect Mode, Disconnect Mode,
Packing Mode, Modem Emulation, or AES Keys to view and change the settings of the
selected tunnel. Because all four tunnels operate independently, you can specify different
configuration settings for each tunnel. For more information, see Tunneling on page 122.
Tunnel – Statistics Page
The Tunnel – Statistics page appears when you click Tunnel in the menu bar. It also
appears when you click Statistics at the top of one of the other Tunnel pages. This read-
only page shows the status and statistics for the tunnel currently selected at the top of
this page.
Figure 4-12. Tunnel - Statistics Page
To Next Page
Loading...
Need help?
General