A: Configuration Using Telnet or Serial Port
EDS4100 4 Port Device Server User Guide 132
Root Menu
The following parameters are top-level root commands. These commands do not alter
the configuration of the EDS.
Root Configuration
Command
Description
clrscrn
Clears the screen.
enable
Displays the Enable level prompt.
exit
Exit from the system.
ping <host>
Pings the host destination the specified number of times
(count) with a 5-second timeout.
<host> = host destination.
ping <host> <count>
<timeout>
Pings the string destination a specified number of times
with a specified timeout.
<host> = host destination.
<count> = number of times the ping is to occur.
<timeout> = number of seconds that must elapse without a
response before the ping times out.
show history
Displays the set of commands inputted from the moment
user was brought back up to this menu.
show eds4100
Displays the current EDS4100 settings.
trace route <host>
Determines the path taken from a computer to a specified
destination.
<host> = host destination.
To Next Page
Loading...
Need help?
General