Lantronix EDS4100 User Manual

4: Configuration Using the Web Manager
EDS4100 4 Port Device Server User Guide 32
Table 4-1 summarizes the information on the Web Manager pages. Figure 4-3 shows the
structure of the multilevel Web Manager configuration pages.
Table 4-1. Summary of Web Manager Pages
Page Description See
Page
Device
Status
Displays EDS4100 product information and network, line, and
tunneling settings.
36
Network Lets you configure the current network interface on the EDS4100. 38
Line Displays statistics and lets you change the current configuration
and Command mode settings for the four serial lines.
40
Tunnel Displays the current connection status and lets you change the
current configuration settings for up to four tunnels.
46
DNS Displays the current configuration of the DNS subsystem and lets
you change primary and secondary DNS servers.
65
SNMP Displays and lets you change the current Simple Network
Management Protocol (SNMP) configuration settings.
66
FTP Displays statistics and lets you change the current configuration
for the File Transfer Protocol (FTP) server.
68
TFTP Displays statistics and lets you change the current configuration
for the Trivial File Transfer Protocol (FTP) server.
69
HTTP Displays HyperText Transfer Protocol (HTTP) statistics and lets
you change the current configuration, authentication, and RSS
settings.
70
CLI Displays Command Line Interface (CLI) statistics and lets you
change the current CLI configuration settings.
78
SSH Displays and lets you change the configuration settings for SSH
server host keys, SSH server authorized users, SSH client known
hosts, and SSH client users.
81
SSL Lets you upload an existing certificate or create a new self-signed
certificate.
89
XML Lets you export XML configuration and status records, and import
XML configuration records.
92
Filesystem Displays filesystem statistics and lets you browse the filesystem
to create a file or directory, upload files using HTTP, copy a file,
move a file, or perform TFTP actions.
99
Protocol
Stack
Lets you perform lower level network stack-specific activities. 102
IP Address
Filter
Lets you specify all the IP addresses and subnets that are
allowed to send data to this device.
104
Query Port Displays and lets you change configuration settings for the query
port.
106
Diagnostics Lets you perform various diagnostic procedures. 107
System Lets you reboot the EDS4100, restore factory defaults, upload
new firmware, and change the EDS4100’s long and short names.
116

Lantronix EDS4100 Specifications

General

Brand	Lantronix
Model	EDS4100
Category	Server
Language	English