Manitowoc Grove TMS9000-2 Series User Manual

SET-UP AND INSTALLATION TMS9000-2 OPERATOR MANUAL
6-78
Published 02-21-2019, Control # 611-05
1. Remove the bridging plug (1) (Figure 6-158) from the
socket (3) and plug it into the dummy socket (2).
2. Unwind the cable (5) from the holder (7).
3. Remove plug (4) from the dummy socket (6) and plug
into the socket (3).
4. Wind up the cable (5) far enough on the holder (7) so
that it will not be damaged during operation.
Disconnecting Main Boom Electrical Connection
1. Remove the plug (4) (Figure 6-159) from the socket (3)
and plug into the dummy socket (6).
2. Wind the cable (5) onto the holder (7).
3. Remove the plug (2) from the dummy socket (1) and
plug it into the socket (3).
Connecting the Folding Extension Electrical Circuit
1. Unwind the cable (2) (Figure 6-160) from the holder (1).
2. Remove the cap (4) off the socket (3).
3. Unwind the cable (6) from the holder (8).
4. Remove the bridging plug (5) from the dummy socket (7)
and plug it into the socket (3).
5. Wind up the cable (8) far enough on the holder (7) so it
will not be damaged during operation.
6. Wind up the cable (2) far enough on the holder (1) so it
will not be damaged during operation.
Disconnecting the Folding Extension Electrical
Circuit
1. Remove the bridging plug (5) (Figure 6-161) from the
socket (3) and plug it into the dummy socket (7).
2. Wind the cable (6) on to the holder (8).
3. Install the protective cap on the socket (3).
4. Wind the cable (2) onto the holder (1).
6
FIGURE 6-158
7567-57
2
1
3
7
4
5
6
FIGURE 6-159
7567-58
2
1
3
7
4
5
FIGURE 6-160
2
1
3
4
5
6
8
7

Manitowoc Grove TMS9000-2 Series Specifications

General

Brand	Manitowoc
Model	Grove TMS9000-2 Series
Category	Construction Equipment
Language	English