Manitowoc Grove TMS9000-2 Series User Manual

OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-34 Published 02-21-2019, Control # 611-05
Warning message/error message display area
Error messages will appear on the left side of the display with
a red border around the icon. The icon will disappear when
the error is resolved:
Open Error menu
When an error message appears, go to error message menu
on the second page of the main menu and select the
appropriate sub menu based on the error being displayed.
Select symbol (Figure 3-24) and confirm
Exiting the menu/input mode
Press button (1, (Figure 3-25)) on the jog dial or button (2) on
the display to exit the menu or input mode.
Enter the values with jog dial
When you depress the input confirmation button after
highlighting a selection on the screen the input mode is
active (Figure 3-26).
To enter values with the jog dial, rotate dial until desired icon
is highlighted. Depress the input confirmation button to
highlight the input field. Rotate the jog dial clockwise to
increase or counterclockwise to decrease the value slowly.
Depressing and holding the input confirmation button while
rotating it will cause the value to change more rapidly.
Red: Warning message / error message
Off:
No warning message / error message
present
FIGURE 3-24
8882a
1
2
8882-1&2
34
3 For engine
4 For Crane control
Press the
button once:
The opened menu closes – the menu from
the next higher level is opened
Input mode is deactivated
Turn the
knob to the
right:
Increases the value
Turn the
knob to the
left:
Decreases the value
FIGURE 3-25
8854-69
FIGURE 3-26
8854-70

Manitowoc Grove TMS9000-2 Series Specifications

General

Brand	Manitowoc
Model	Grove TMS9000-2 Series
Category	Construction Equipment
Language	English