Revision:1.0(2023-01-12)
221
1. Refer to the disassembly procedures in 7.7.2 Disassembly and Assembly and 7.4.2 Disassembly
and Assembly
to take off the cover of the main board box and the display lift.
2. Remove the two Phillips pan-head screws on the display conversion board, and take off the
display conversion board.
1 Display conversion board
7.14.3 Commissioning and Verification
None
7.15 SSD Card(FRU)
7.15.1 General Information
Diagnostic Ultrasound System
Service Manual
7 FRU Replacement
To Next Page
Loading...
Need help?
General
