To Next Page

To Previous Page

Revision:1.0(2023-01-12)

250

FRU Code FRU Name Lower-Level FRU

Code

Lower-Level FRU

Name

115-083596-00 Gas spring assembly

(FRU)

7.31.2 Disassembly and Assembly

Precautions

Protect the exterior surface of the parts.

Tools Required

Art knife, crosshead screwdriver (M4), flathead screwdriver, socket head wrench (M5), and

circlips

Fixtures Required

None

Specific Steps

1. Refer to the disassembly procedures in 7.2.2 Disassembly and Assembly, the section of

removing the main unit box, 7.22.2

Disassembly and Assembly, 7.23.2 Disassembly and

Assembly

, 7.30.2 Disassembly and Assembly, 7.27.2 Disassembly and Assembly, and 7.28.2

Disassembly and Assembly, and take off each assembly.

2. Refer to the disassembly procedures in 7.47.2

Disassembly and Assembly, 7.29.2 Disassembly

and Assembly

, 7.38.2 Disassembly and Assembly, 7.37.2 Disassembly and Assembly, and 7.46.2

Disassembly and Assembly, and take off each assembly. Then, remove the back board of the

battery box.

3. Use a crosshead screwdriver to remove the 12 M4X12 crosshead combination screws that

connect the cover, and take off the cover.

Diagnostic Ultrasound System

Service Manual

7 FRU Replacement

Mindray TEX20 Service Manual

Other manuals for Mindray TEX20