Revision:1.0(2023-01-12)
100
5. Choose About>Peripherals to access the printing service screen.
1)Select Report Print in the Service Type column.
2)Select the printer in the Property section and set the printing parameters.
3)Click OK to complete the settings.
3.6.4 Connecting the Wireless Printer
The system can connect to a wireless graph/text printer to print reports.
Perform the following steps:
1. Connect the power cable of the printer to an appropriate power outlet.
2. Turn on the ultrasonic system and the printer.
3. Connect the system and printer to the same network and enable Wi-Fi for the printer.
4. On the printing configuration screen, select a wireless printer and perform printing settings.
3.6.5 Connecting the Barcode Reader
The system supports reading patient information such as patient ID through a barcode scanner.
1. As shown in the following figure, key parts of a barcode scanner include an LED indicator, a
scan window, and a scan trigger switch.
2. Connect one end of the scanner cable to the socket at the bottom of the scanner handle.
3. Connect the other end of the cable (USB terminal) to a USB port of the ultrasonic system.
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
Need help?
General
