Revision:1.0(2023-01-12)
99
4. Install the printer driver as follows:
1)On the peripheral settings screen, tap the Printer Driver tab.
2)Tap Add Printer.
Note: see the printer’s operation manual to select the port, or use the default port of the
system.
3)Install the printer driver as prompted on the screen.
5. Configure the printing service as follows:
1)Choose System>Peripherals>Print Service to access the printing service screen.
2)Click Add Service.
3)Select a printing service type and enter the service name.
4)Click OK.
5)Select the printer in the Property section and set the printing parameters.
6)Click OK to complete the settings.
3.6.3 Connecting the Graphic/Text Printer
As shown in the figure below, a graph/text printer has a power cable and a data cable. The power
cable must be directly connected to a socket that is properly grounded.
1. Connect the data cable of the printer to the USB port of the equipment.
2. Power on the equipment and the printer.
3. Put the installation CD of the printer driver into the drive.
4. Install the printer driver as follows:
1)On the peripheral settings screen, tap the Printer Driver tab.
2)Tap to select and add a printer.
Note: see the printer’s operation manual to select the port, or use the default port of the
system.
3)Install the printer driver as prompted on the screen.
Diagnostic Ultrasound System
Service Manual
3 Installation
To Next Page
Loading...
Need help?
General
