Revision:1.0(2023-01-12)
295
Fixtures Required
None
Specific Steps
1. Refer to the disassembly procedures in 7.20.2 Disassembly and Assembly and 7.21.2
Disassembly and Assembly to take off the on/off button board.
2. Unplug the signal cable from the on/off button signal cable.
1 On/off button board
2 On/off button signal cable
7.59.3 Commissioning and Verification
None
7.60 Wi-Fi antenna (User)
7.60.1 General Information
1 No.3 and No.4 are Wi-fi antenna (User).
Diagnostic Ultrasound System
Service Manual
7 FRU Replacement
To Next Page
Loading...
Need help?
General
