EasyManuals Logo

Nikon DS-L3 User Manual

Nikon DS-L3
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
Chapter 13 Changing Settings
175
Changing
Settings
13.3.1
Configuring HTTP Server
— [INTERNAL SERVER] area —
In the [INTERNAL SERVER] area, you can configure basic settings for connecting this system to the network and settings for
using this system as an HTTP server.
Item Setting Item Initial Setting See
(1) Enabling or disabling network connection [Network] checkbox: Enable/Disable Enable p.175
(2) Acquiring an IP address from the DHCP server [DHCP] checkbox: Enable/Disable Disable p.176
(3) Specifying a fixed IP address and a subnet mask [IP address] field, [subnet mask] field
-
p.177
(4) Configuring authentication against web browser
access
[User ID] field, [Password] field
-
p.178
(1) Enabling or disabling network connection
Specifies whether to connect this system to the network. When you enable the network connection, the HTTP server feature
automatically functions and you can access this system via a web browser from a PC.
Caution: Before connecting to the network
Carefully check if settings are correct before plugging into the network. A wrong setting may cause a failure in your
network.
Network connection
No network connection is made unless this setting is enabled even if a network cable is connected.
1 Display the [SETUP MENU: NETWORK] screen.
2 Select the [NETWORK] checkbox on the [INTERNAL
SERVER] area.
Select the checkbox if you want to connect to the network.
Clear it to disconnect from the network.
Enable/Disable (Initial setting: Enable)
When the [NETWORK] checkbox is selected (enabled), the
HTTP server function works automatically, allowing access
to the DS-L3 from the PC through the web browser.
3 Press the [SAVE] button.
The network connection setting is saved.
Enabling or Disabling Network Connection
[NETWORK] Checkbox Setting
Choice Setting
Enable Makes network connection, enabling the HTTP server of the DS-L3. (Initial setting)
Disable Makes no network connection.
Enabling/disabling network connection
When the [NETWORK] checkbox is cleared (disabled), the setting items in the [SETUP MENU: NETWORK] screen
are grayed out, disabling the network connection setting.
To make a connection to the network, select the [NETWORK] checkbox and then perform advanced settings.
3
2
1
Enables or disables
network connection.

Table of Contents

Other manuals for Nikon DS-L3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nikon DS-L3 and is the answer not in the manual?

Nikon DS-L3 Specifications

General IconGeneral
BrandNikon
ModelDS-L3
CategoryCamera Accessories
LanguageEnglish

Related product manuals