Nikon DS-L3 User Manual

Chapter 14 Connecting to a PC
198
Connecting to
PC, Printer, and
Network
14.2
Using the DS-L3 as an External Recording Medium of PC
— Connection with PTP setting —
When [PTP] is selected as a USB device of the DS-L3, the DS-L3 is recognized as an external recording medium of PC if it is
connected to the PC with a USB cable.
1 Check the DS-L3 settings and connection with the PC
referring to “14.1 Connecting the DS-L3 to a PC”.
Af
ter checking the connection, turn off the DS-L3.
2 Run the PC.
Wait until Windows starts up and the PC enters the standby
state.
3 Turn on the DS-L3.
After the DS-L3 has started, connection with the DS-L3 is
recognized by the PC and the [AutoPlay] dialog box
appears. Perform necessary processing following the
instructions in the dialog box.
On the PC, you can reference recording media of the DS-L3
as external recording media.
Note: The [AutoPlay] dialog box may not be displayed
depending on the setting.
Note: The Windows standard device driver is installed as
needed at the first connection.
Example of Display of [AutoPlay] Dialog Box
4 Perform necessary operations on the PC.
The following operations are available on the PC.
• Move, copy, and delete files.
• View, process, and save files.
The recording medium of the DS-L3 contains captured
image files, log files, and measurement result CSV files.
Perform necessary processing.
5 Upon completion of necessary operations, turn off the
DS-L3 and disconnect the USB cable.
Turn off the power of the DS-L3 and then disconnect the
USB cable.
Example of File Display Using Microsoft Explorer
Recognized as an
external recording
medium
You can view and
process saved files.

Nikon DS-L3 Specifications

General

Brand	Nikon
Model	DS-L3
Category	Camera Accessories
Language	English