Location Data
G buttonU
Bsetup menu
This item is available only when a GNSS device is connected. Use it to adjust location data settings or
view location data.
Option Description
[Standby
timer]
If [
OFF] is selected, the standby timer will not expire regardless of the option
selected for Custom Setting c3 [Power off delay] > [Standby timer]. If [ON]
is selected, the standby timer will expire if no operations are performed for the
period chosen using Custom Setting c3 [Power off delay] > [Standby timer],
reducing the drain on the battery.
[Set clock
from satellite]
Select [ON] to synchronize the camera clock with the time acquired from the
GNSS unit.
[Position]
View location data acquired from a GNSS unit. The items displayed vary with the
type of device connected.
748
Location Data
To Next Page
Loading...
Need help?
General
