Olympus RollerFORM User Manual

DMTA-20073-01EN, Rev. C, November 2015
Maintenance 105
Figure 6-32 Tightening the captive screws of the flange that contains the liquid-
control valves from inside the liquid chamber
8. Make sure that the acoustic wheel’s interior is clean of particles, dirt, deposits, or
spots. If necessary, clean it. For more information, see “Cleaning the Liquid
Chamber” on page 85.
9. Install the plain flange:
a) Install the flange by aligning the holes on the stainless steel ring to the holes
on the flange (see Figure 6-33 on page 106).
Two of the four captive
screws accessed from
inside the liquid
chamber

Olympus RollerFORM Specifications

General

Brand	Olympus
Model	RollerFORM
Category	Laboratory Equipment
Language	English