DMTA-20073-01EN, Rev. C, November 2015
RollerFORM Scanner Overview
23
The encoder can be relocated to an alternate position on the top of the acoustic
wheel. For more information, see “Relocating the Mini-Wheel Encoder on the
Acoustic Wheel” on page 125.
1.4 Manual Pump
A 1.0 L manual pump and a feeding tube are supplied with the RollerFORM
(Figure 1-5 on page 24). The manual pump serves two purposes: filling the acoustic
wheel’s liquid chamber and applying water couplant to the surface to inspect.
For more information about filling the liquid chamber, see “Filling the Acoustic
Wheel’s Liquid Chamber” on page 39.
The manual pump is also available as a spare parts kit (P/N: ROLLERFORM-A-PUMP
[Q7790006]). For more information, see “Manual Pump Spare Parts Kit” on page 146.
To Next Page
Loading...
Need help?
General
