Olympus RollerFORM User Manual

DMTA-20073-01EN, Rev. C, November 2015
Chapter 3 40
— Prevents formation of algae or mold.
— Prevents tire opacification.
— Enables using the scanner at lower temperatures.
— Has no adverse effects on the acoustic characteristics of the scanner.
When manipulating noncorrosive glycol while operating the RollerFORM, the safety
measures found in the product’s MSDS must be applied. For more information, see
“Safety” on page 9.
When the liquid chamber is filled with noncorrosive glycol, follow all pertaining
safety and environmental measures, and take special care to thoroughly clean any
glycol that may spill on the acoustic wheel, on other parts of the scanner, or on any
other surface.
• Distilled or deionized water
Use distilled or deionized water when noncorrosive glycol cannot be used
because of environmental or security constraints, or when using glycol is
impractical.
•Tap water
Use tap water when noncorrosive glycol cannot be used because of
environmental or security constraints, or when using glycol, distilled water, or
deionized water is impractical.
3.1.2 Filling the Liquid Chamber
Before filling the acoustic wheel’s liquid chamber with water, , let the water stand in
the the manual pump for a few hours to allow the air dissolved in it to be released.
CAUTION
IMPORTANT

Olympus RollerFORM Specifications

General

Brand	Olympus
Model	RollerFORM
Category	Laboratory Equipment
Language	English