DMTA-20073-01EN, Rev. C, November 2015
Important Information — Please Read Before Use
10
• Hand protection
Wear butyl rubber, natural rubber, neoprene, or other suitable gloves for routine
industrial use.
• Body protection
Wear impervious clothing.
Warnings
General Warnings
• Carefully read the instructions contained in this instruction manual prior to
turning on the instrument.
• Keep this instruction manual in a safe place for further reference.
• Follow the installation and operation procedures.
• It is imperative to respect the safety warnings on the instrument and in this
instruction manual.
• If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment could be impaired.
• Do not install substitute parts or perform any unauthorized modification to the
instrument.
• Service instructions, when applicable, are for trained service personnel. To avoid
the risk of electric shock, do not perform any work on the instrument unless
qualified to do so. For any problem or question regarding this instrument, contact
Olympus or an authorized Olympus representative.
• Do not allow metallic or foreign objects to enter the device through connectors or
any other openings. Otherwise, a malfunction or electric shock may result.
Electrical Warnings
The instrument must only be connected to a power source corresponding to the type
indicated on the rating label.
To Next Page
Loading...
Need help?
General
