DMTA-20073-01EN, Rev. C, November 2015
Important Information — Please Read Before Use
11
Secure the RollerFORM to a lanyard whenever you are using it to scan in an upside-
down position and/or at heights above ground level to prevent it from falling and
causing physical harm or property damage.
The RollerFORM should be inspected for loose and/or missing components prior to
and following use to avoid foreign object damage (FOD) on inspected units.
Equipment Disposal
Before disposing of the RollerFORM, check your local laws, rules, and regulations,
and follow them accordingly.
CE (European Community)
WEEE Directive
This device complies with the requirements of both directive
2004/108/EC concerning electromagnetic compatibility and directive
2006/95/EC concerning low voltage. The CE marking indicates
compliance with the above directives.
In accordance with European Directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE), this symbol indicates that the
product must not be disposed of as unsorted municipal waste, but
should be collected separately. Refer to your local Olympus distributor
for return and/or collection systems available in your country.
To Next Page
Loading...
Need help?
General
