Omron NT21 User Manual

4-3SectionCommands/Responses
390
4-3-16 Numerical Input Notify Command (Sent from PT to Host)
Command
Format
t1
1B 53
[ESC] S
d4
t4
4E
Nt2t3
0D
d1 d2
d3
d8d5 d6 d7 s1 s2 [CR]
* * * ** * * * * * * *
* * * ** * * * * * * *
* * * *
t
1
to t
4
: Input numeral memory table entry number (4 BCD digits)
0000 to 1999
This is the number of numeral memory table entry for which
there has been numerical input.
d
1
to d
8
: Input numeric data (8 hexadecimal digits)
00000000 to FFFFFFFF
H
s
1,
s
2
: Checksum (2 hexadecimal digits)
This is always added.
Response
None
Function
• In accordance with operations at the PT, such as numeral setting and copying
of memory table entries, notifies the host that a numeric value has been input
to the numeral memory table entry.
• Since it is not possible to write to numeral memory table entries from No.247 to
No253 (areas for clock data display/reading use only), notification of these
table entries is not executed.
Example
Command
t1
1B 53
[ESC] S
d4
t4
4E
Nt2t3
0D
d1 d2
d3
d8d5 d6 d7 s1 s2 [CR]
* * * ** * * * * * * *
* * * ** * * * * * * *
* * * *
Input numeral memory table entry number: No.150
Input numeric value data (hexadecimal): 30000H
Checksum (hexadecimal): 05H
Here, it is ascertained that 30000 has been input to numeral memory table entry
150 (whether this is 30000 in hexadecimal or 30000 in BCD is determined by the
numeral storage type set for the numeral memory table entry).
00196608
00030000
00030000
00030000
Input numeral Numeral memory table entry 150
BCD
Binary
Format

Omron NT21 Specifications

General

Brand	Omron
Model	NT21
Category	Touch terminals
Language	English