Omron NT21 User Manual

x
Related Manuals:
Related manuals are listed below.
The  symbol at the end of the catalog number is the revision number.
Connecting and Setting Up the Programmable Terminal
 NT21 PT Setup Manual (V068-E1-)
 NT31 and NT31C PT Setup Manual (V062-E1-)
 NT631 and NT631C PT Setup Manual (V063-E1-)
These manuals are used separately for the different models of PT. They describe
connecting the Programmable Terminals to a host and peripheral devices and
settings required for communications and applications.
The functions and actual operating messages for the NT21, NT31, NT31C,
NT631, and NT631C PTs are provided in the Reference Manual (V069-E1-).
Programmable Terminal Functions and Operation
 NT21, NT31, and NT631 Series PT Reference Manual
(V069-E1-, this manual)
This manual is used for any of the following PTs: NT21, NT31, NT31C, NT631,
and NT631C. It describes screen configurations, part functions, host control
methods, and other application information.
PT connection and setup procedures are described in the NT21 PT Setup Manu-
al (V068-E1-), NT31 and NT31C PT Setup Manual (V062-E1-), and the
NT631 and NT631C PT Setup Manual (V063-E1-).
Creating and Transferring Screen Data, and Installing the System Program
 NT-series Support Tool for Windows Ver. 4. Operation Manual (V061-E1-)
The screens displayed on the NT21, NT31, NT31C, NT631, and NT631C PTs
are created with the Support Tool and transferred to the PT. This manual de-
scribes how to create and transfer screen data. It also describes how to down-
load a system program to a PT using the System Installer.
The NT-series Support Tool for Windows is normally referred to as merely the
Support Tool.
Connecting to Controllers Not Made by OMRON
 PC Connection Manual (V042-E1-)
The NT31, NT31C, NT631, and NT631C PTs can be connected to controllers in
the following series: Mitsubishi’s A Series and FX Series. This manual describes
the connection and setup methods for these controllers.
The NT-series Support Tool for Windows Version 4. is required to connect the
NT31, NT31C, NT631, and NT631C PTs to Mitsubishi controllers.
 NT31/NT631 Multivendor Connection Manual (V060-E1-)
The NT31 and NT31C PTs can be connected to controllers in the following se-
ries: Allen-Bradley SLC 500 Series, GE Fanuc 90-20 and 90-30 Series, and Sie-
mens S7-300 and S7-400 Series. This manual describes the connection and set-
up methods for these controllers.

Omron NT21 Specifications

General

Brand	Omron
Model	NT21
Category	Touch terminals
Language	English