4
4.13
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
5. Reinstall the seat base frame and torque fasteners to
specification.
Seat Base Frame fasteners
8 ft-lbs (11 Nm)
6. Install regulator and fuse box to the block-off panel.
Torque fasteners to specification.
Regulator/Fuse Box fasteners
5 ft-lb (7 Nm)
7. Install fuel tank strap screw. Torque screw to
specification.
Fuel Tank Strap Screw
8 ft-lbs (11 Nm)
8. Reinstall center console, shift knob and screws.
9. Reinstall seat belt mechanism. Torque bolt to
specification.
Seat Belt Mechanism Bolt:
40 ft-lbs (54 Nm)
10. Reinstall right rocker panel and all previously
removed fasteners.
11. Reconnect the fuel line and fuel pump electrical
harness. Verify connections are secure.
12. Reinstall the battery and battery bracket. Torque
fastener to specification.
Battery Bracket:
8 ft-lbs (11 Nm)
13. Install both seats and test the fuel pump by turning
the ignition key on and listening for the pump to
activate. Check the fuel line fittings for leaks.
ELECTRONIC FUEL INJECTION
To Next Page
Loading...
Need help?
General
