To Next Page

To Previous Page

7.8

9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual

8. Torque wheel hub nut (Item 6) to specification and

install a new cotter pin (Item 7). Tighten nut slightly if

necessary to align cotter pin holes. Bend both ends

of cotter pin around end of spindle in different

directions.

Wheel Hub Castle Nut:

110 ft-lbs (149 Nm)

9. Install new brake caliper mounting bolts and torque

to specification.

Front Caliper Mounting Bolts:

40 ft-lbs (54 Nm)

CAUTION

New bolts have a pre-applied locking agent which is

destroyed upon removal. Always use new brake caliper

mounting bolts

upon assembly.

10. Install wheel and four wheel nuts. Torque wheel nuts

to specification.

Wheel Nuts:

120 ft-lbs (163 Nm)

11. Rotate wheel and check for smooth operation.

FRONT PROPSHAFT SERVICE

Front Propshaft Removal

1. Remove the center console.

1. Cap 3. Torx Screw

2. Shifter

4. Push Rivet

2. Locate the prop shaft roll pin and use the Roll Pin

Removal Tool (PN 2872608) to remove the roll pin.

Discard roll pin. Push the front prop shaft rearward to

remove it from the front gearcase input shaft.

Roll Pin Removal Tool:

PN 2872608

NOTE: Right front wheel can be removed to gain

better access to the propshaft roll pin.

FINAL DRIVE

Polaris 2014 RZR XP 1000 Service Manual

Questions and Answers: