Polaris 2014 RZR XP 1000 Service Manual

9.14
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
Caliper Removal
NOTE: Do not get oil, grease, or fluid on the parking
brake pads. Damage to or contamination of the pads
may cause the pads to function improperly.
1. Remove the clip pin and pin (A) from the parking
brake cable.
NOTE: Be sure the parking brake is not
engaged.
2. Remove the two fasteners (B) retaining the parking
brake caliper mount / shift cable bracket.
3. Lift the parking brake caliper off the brake disc and
remove it from the vehicle.
Caliper Disassembly / Inspection
NOTE: Refer to the “Electronic Parts Catalog” for
parking brake caliper replacement parts information.
1. Remove the two caliper assembly bolts (C).
2. Slide the brake pads and springs from the assembly.
NOTE: Retain the lever and ball bearings for
reassembly.
3. Inspect brake pads for excessive wear. Replace as
needed.
4. Check the three steel balls for any signs of cracking.
Replace as needed.
5. Check ball seats in lever and stationary actuator. If
excessively worn, replace parts as needed.
BRAKES

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English