Polaris 2014 RZR XP 1000 Service Manual

6
6.15
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
Button To Tower Clearance Inspection
1. Inspect the button to tower clearance as shown.
Replace the drive clutch if clearance is beyond
specification.
Button to Tower Clearance:
0.000-.012″ (.000-.304 mm)
2. Inspect the tower sheave surfaces. Replace the drive
clutch if worn, damaged or cracked.
Spider Removal
1. Install clutch onto holding fixture (2871358-A) and
secure in bench vice. Loosen and remove the spider
jam nut (counterclockwise) using the Clutch Spider
Nut Socket (PU-50578).
Clutch Spider Nut Socket: PU-50578
Clutch Holding Fixture: PN 2871358-A
2. Loosen and remove the spider (counterclockwise)
using Clutch Spider Removal / Installation Tool (PN
2870341).
Spider Removal / Installation Tool: 2870341
Clutch Holding Fixture: 2871358-A
Roller, Pin, and Thrust Washer Inspection
1. Inspect all rollers, roller bushings and roller pins by
pulling a flat metal rod across the roller.
2. Turn roller with your finger. If you notice resistance,
galling, or flat spots, replace the drive clutch.
NOTE: Rollers, pins, thrust washers and buttons
are not serviceable at the time of this publication.
CLUTCHING

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English