Polaris 2014 RZR XP 1000 Service Manual

6.8
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
11. Remove the four push rivets that secure the upper
guard plate to the top of the inner PVT cover. Make
note of the routing of the fuel lines, vent line, battery
cable and wire harness for proper assembly.
12. Loosen the hose clamp attaching PVT inlet duct to
the inner clutch cover. Disengage the hose from the
inner clutch cover.
13. Loosen hose clamps (Item 3) that attach clutch outlet
duct to inner clutch cover. Disengage hose from the
cover.
14. Remove the seven bolts (Item 4) that retain inner
clutch cover to engine and transmission. Remove
inner clutch cover.
PVT Assembly
1. Inspect inner clutch cover. Replace if cracked or
damaged.
2. Inspect the seal on the transmission input shaft.
Replace if damaged.
3. Inspect inner clutch cover seal (engine side).
Replace if cracked, torn or damaged.
4. Install and properly align the inner clutch cover. Be
sure the fuel line, vent line and battery cables are
properly routed through the guard plate as shown
(Item 1).
CLUTCHING

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English