Polaris 2014 RZR XP 1000 Service Manual

8.4
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
4. Remove the retaining ring (Item 1) and slide the shift
lever (Item 3) off the mounting bracket and out from
the frame.
5. Remove both bushings (Item 2) from the shift lever
and service as needed.
Installation
1. Perform the removal steps in reverse order to install
the gear shift lever (lever, cable, console, shift knob).
SHIFT CABLE
Inspection
Shift cable adjustment may be necessary if symptoms
include:
• No gear position or AWD display on instrument
cluster
• Ratcheting noise on deceleration
• Inability to engage into a gear
• Excessive gear lash (noise)
• Gear selector moving out of desired range
Inspect shift cable, clevis pins, and pivot bushings and
replace if worn or damaged.
Adjustment
1. Locate the shift cable attached to the transmission
case in the right rear wheel well area.
2. Inspect shift cable (Item 1), clevis pin, pivot
bushings, and dust boot (Item 2). Replace if worn or
damaged.
TRANSMISSION

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English