Polaris 2014 RZR XP 1000 Service Manual

4.12
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
10. Remove the T-40 Torx screw (Item 10) retaining the
fuel tank strap to the seat base frame. Remove the
strap from the other side of the seat base frame as
well.
11. Remove the Torx screws (Item 11) and plastic rivets
(Item 12) retaining the block-off panel using a T40
Torx driver. Remove the panel from the vehicle.
12. Remove the nuts (Item 13) retaining the regulator
and Torx screws (Item 14) retaining the fuse box.
13. Remove the fuel tank vent line from the tank fitting.
14. Lift the rear of the fuel tank up first. Carefully pull the
fuel tank out of the vehicle.
Fuel Tank Installation
1. Carefully reinstall the fuel tank assembly. Install the
inner tank bracket with the fuel tank to ensure the
bracket is inserted properly into the lower fuel tank
mount.
2. Reinstall the fuel tank bracket and fasteners.
3. Install the vent line.
4. Reinstall block-off panel. Secure with plastic rivets
and torque screws to specification.
Block-off Panel Screws
8 ft-lbs (11 Nm)
ELECTRONIC FUEL INJECTION

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English