Polaris 2014 RZR XP 1000 Service Manual

2
2.31
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
Engine / Chassis Electrical Ground
Inspect the ground cable connections. Remove ground
terminals and clean if necessary.
1. The chassis ground connection (Item 1), located
below the start solenoid (Item 2), can be accessed
through the left rear wheel area.
2. Inspect the chassis ground terminals. Be sure the
grounds are clean and tight.
Spark Plug Service
Inspect and replace the spark plugs at the intervals
outlined in the Periodic Maintenance Chart.
1. Remove the cargo box access panel (Item 1).
WARNING
A hot engine can cause serious burns. Allow engine to
cool or wear protective gloves when removing the spark
plugs.
2. Remove both spark plug caps (Item 2).
NOTE: Note MAG and PTO reference decals on
spark plug wires for reassembly.
3. Clean out plug wells with compressed air to remove
any loose dirt or debris.
4. Rinse plug wells with water and dry with compressed
air.
NOTE: Spark plug wells have drain holes built
into the cylinder head to allow water to drain out.
MAINTENANCE

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English