Polaris 2014 RZR XP 1000 Service Manual

9
9.17
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
Disc Replacement
1. Remove the parking brake caliper from the disc (see
“Caliper Removal”).
2. Using a 1/2” socket and ratchet, remove the brake
disc retaining bolt and flat washer.
3. Remove the disc from the transmission shaft.
4. Install the new brake disc. Install the mounting bolt
and flat washer. Torque the mounting bolt to
specification.
Parking Brake Disc Mounting Bolt:
14 ft-lb (20 Nm)
FRONT BRAKE PADS
Pad Removal
1. Elevate and support front of vehicle.
CAUTION
Use care when supporting vehicle so that it
does not tip or fall.
Severe injury may occur if machine tips or falls.
2. Remove the wheel nuts and front wheel.
3. Loosen the pad adjuster screw 2-3 turns.
4. Remove the upper and lower caliper mounting bolts
and remove the caliper from the front hub.
NOTE: When removing caliper, use care not to
damage brake line. Support caliper to avoid
kinking or bending brake line.
BRAKES

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English