Polaris 2014 RZR XP 1000 Service Manual

6
6.23
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
5. Press down on the top of the spider assembly,
pushing the spider onto the shaft. Remove snap ring
(A) and slowly release the assembly.
6. Remove the spider assembly and spring (B).
NOTE: Spring is compression only and has no
torsional wind.
7. Remove the inside spider plate (D) and spider
dampener (E). Inspect the spider dampener (E) for
wear and replace if needed.
8. Remove the E-clips (F), washers (G), and the clutch
rollers (H). Inspect the rollers for wear; replace if
worn.
9. Remove the clutch assembly from the holding tool.
10. Press out the spring pins (I) in the inner sheave.
CLUTCHING

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English