Polaris 2014 RZR XP 1000 Service Manual

3
3.29
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
7. Install the Clutch Center Distance Tool (PU-50658)
onto the crankshaft (Item 3) and transmission input
shaft to properly position the clutch center distance.
The pictures below show the tool (PU-50658)
properly installed (Item 4).
8. Loosen the two bolts (Item 5) retaining transmission
joint bracket to the transmission on the right side.
9. Align the front transmission mounting holes with
transmission joint bracket mounting holes on engine.
10. Install the two bolts (Item 6) retaining the
transmission joint bracket to the engine on the right
side. Hand tighten the bolts so they remain loose at
this time.
NOTE: DO NOT torque fasteners at this time.
11. Install the two longer bolts into left side mounting
holes. Torque left side mounting bolts to specification
using the numbered sequence shown.
12. Torque right side mounting bolts to specification
using the numbered sequence shown.
Engine / Transmission Mounting Bolts:
Step 1-2: 64 ft-lb (87 Nm)
Step 3: 5 ft-lb (7 Nm)
Step 4-7: 44 ft-lb (60 Nm)
13. Remove the clutch center distance tool.
ENGINE

Polaris 2014 RZR XP 1000 Specifications

General

Brand	Polaris
Model	2014 RZR XP 1000
Category	Utility Vehicle
Language	English