Chapter 3: Configuring Your Library
Setting Up E-mail Notifications
Quantum Scalar i6000 User’s Guide 191
The body text in the e-mail notification provides details about the issue
and library conditions at the time of the event. The e-mail notification
also includes an attachment, referred to as a repair page, that provide a
problem description and corrective actions you or a customer service
engineer (CSE) can perform. For more information about e-mail
notifications, see
E-mail Notifications on page 47.
Note: If the email addresses in the Contact tab of the Notifications
dialog and the Email Notifications dialog are the same, the
email will ‘bounce’ (ie, undeliverable) and fail to be delivered.
To set up e-mail recipients for notifications, perform the following steps:
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > Notifications > System Setup. The System Setup
Notification dialog box appears with the Contact Information tab
displayed.
3 (Warning) Indicates that a condition exists within a library subsystem that has little effect on
system operations. Typical library operations can continue without immediate
corrective action, but you should investigate the condition and correct the
problem when possible. Warnings also can provide helpful information, such as
indicating that a door is open.
Examples of warning situations include a FRU that is functioning less reliably or a
temperature threshold that has been reached that does not affect reliable
operations.
Severity Level Description
To Next Page
Loading...
Need help?
General