Chapter 3: Configuring Your Library
Configuring Fibre Channel I/O Blades
Quantum Scalar i6000 User’s Guide 207
2 As necessary, change the information in the Name and Port text
boxes, and then click the appropriate host type by operating system
from the Type drop-down list. You cannot change the World Wide
Name (WWN).
Caution: You also must make the necessary physical changes to
the name, operating system, or port connection.
3 Click OK.
Deleting an FC Host
1 Log on as an administrator.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Setup > Blades > Access > FC Host. The FC Host dialog box
appears.
Note: FC hosts can be reconfigured without powering down the
system.
Click the host from the list, and then click Delete. A message
appears that asks you whether you want to delete the host.
Note: The Delete button is unavailable if the host is online.
4 Click Yes. A message appears that indicates a successful deletion.
5 Click OK.
To Next Page
Loading...
Need help?
General