1,000-SHEET FINISHER INSTALLATION 10 August, 2001
3-36
3.12.2 INSTALLATION PROCEDURE
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: If this finisher will be installed on the B022 or B027 copier, the following
options must be installed before installing this finisher.
Bridge Unit (B417)
Paper Tray Unit (B390) or LCT (B391)
1. Unpack the finisher and remove the tapes.
NOTE: Be sure to keep screw [A]. It will be needed to secure the grounding
plate in step 4.
B408I103.WMF
B408I102.WMF
[A]
To Next Page
Loading...
Need help?
General
