10 August, 2001 SERVICE PROGRAM MODE
4-25
Service
Tables
2
Mode Number/Name Function/[Setting]
Transfer Roller Cleaning996*
Selects whether the transfer roller is cleaned before
each copy job.
Set this to ‘1’ when dirty background appears on the
reverse side of the first page of a copy job. However,
the first copy time will be longer.
If this SP is at 0, the transfer roller is never cleaned.
See ‘Detailed Section Descriptions – Transfer Roller
Cleaning” for more details.
[0 = No / 1 = Yes]
997* Vts Setting (Factory)
DFU
PCU Reverse Rotation Time
1Wait Time
Adjusts the waiting time for starting to rotate the drum
in reverse after the end of each job.
The wait time calculation formula is as follows.
This value x 30 ms. 0: Reverses immediately after the
end of the job (no waiting)
[0 ~ 99 / 20 / 1/step]
998*
2 Reverse Time Adjusts the drum reverse rotation time.
The reverse rotation time calculation formula is as
follows.
This value x 30 ms. 0: No reverse at end of job
[0 ~ 99 / 1 / 1/step]
Toner Control Data Display999*
Displays the toner density control data on the debug
monitor. DFU
[0 = No / 1 = Yes]
SP4-XXX: Scanner
4
Mode Number/Name Function/[Setting]
Main Scan Magnification (Scanner)008*
Adjusts the magnification in the main scan direction for
scanning.
Use the ! key to toggle between + and – before
entering the value. The specification is
±
1%. See
“Replacement and Adjustment - Copy Adjustment” for
details.
[–0.9 ~ +0.9 / 0.0 / 0.1% step]
Sub Scan Magnification (Scanner)009*
Adjusts the magnification in the sub scan direction for
scanning.
Use the ! key to toggle between + and – before
entering the value. The specification is
±
1%. See
“Replacement and Adjustment - Copy Adjustment” for
details.
[–0.9 ~ +0.9 / 0.0 / 0.1% step]
To Next Page
Loading...
Need help?
General
