Wizard Prompt Description Value
Queue The queue for the target printer
(actual destination).
This name is case-sensitive.
__ Default
__ Other:
1. On the menu bar, select Printer / Create / PSF– TCP/IP to start the Create Printer Wizard.
2. Provide the worksheet information to the wizard. For assistance, refer to the InfoPrint
Manager Administration GUI online help.
3. If you did not enable the printer with the Create Printer Wizard, use the InfoPrint
Manager Administration GUI to enable it.
Adding an AIX Printer
Create an AIX printer to represent a printer that will accept the data stream that comes out of the printer
driver without transforming it. For example, to send the output of a PostScript driver to a PostScript
printer.
Before adding an AIX printer, complete the following worksheet:
Wizard Prompt Description Value
Name The name for the actual
destination object (8 character
limit).
This name is case-sensitive.
Server The server that controls this
actual destination. The server
name is the same as the name
of the host system where the
server is installed.
This name is case-sensitive.
Model Select the printer model from the
pull-down list in the InfoPrint
Manager Administration GUI. If
the printer you are working with
is not in the pull-down list, enter
the name as it appears on the
printer.
5. InfoPrint Manager for AIX
46
To Next Page
Loading...
Need help?
General
Weight and Dimensions
