Message Cause Solution
"Toner Cartridge is almost
empty. Replace Toner
Cartridge."
The print cartridge is almost
empty.
Prepare a new print cartridge.
"Tray setg. do not match spcfd
siz&typ. Select new tray or use
sz&typ below."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
• Check that the printer
driver settings are correct,
and then load paper of the
size selected in the printer
driver into the input tray.
For details about how to
load paper, see page 37
"Loading Paper".
•
Select the tray manually to
continue printing, or
cancel a print job. For
details about how to select
the tray manually, or
cancel a print job, see "If
an Error Occurs with the
Specified Paper Size and
Type", Operating
Instructions.
"Failed to update @Remote
certificate. Please call service."
Updating the @Remote
certificate failed.
Turn the printer off, and then
turn it on again. If the problem
persists, contact your sales or
service representative.
"Waste Toner is almost full" The print cartridge must be
replaced when the life of the
waste toner is ending.
Prepare a new print cartridge.
"Waste Toner full" The waste toner is full. Replace the print cartridge. For
details, see "Replacing the Print
Cartridge", Operating
Instructions.
"You do not have the privileges
to use this function."
The logged in user name does
not have permission for the
selected function.
For details about how to set
permissions, see Security Guide.
3. Troubleshooting
82
To Next Page
Loading...
Need help?
General
Weight and Dimensions
