109
• If the printer is powered on without installing the printer driver, Windows' Plug & Play
runs. When you use the printer driver, do not turn on the printer while the cable is
connected, until instructed in the procedure for installing the printer driver.
• Be sure to use the IEEE1284-compliant cable. If you use cables other than the
IEEE1284-compliant cable, your data may become corrupt.
• IEEE1284-compliant: compatible mode, ECP mode, and nibble mode are supported.
• Some computers may not support ECP mode.
• ECP mode is configured in the BIOS settings of the computer. Some computers may
use the software tools for Windows.
• Some computer models may not perform ECP operations even if they are set to ECP
mode. Contact the computer manufacturer.
• Printing using the USB parallel conversion cable is not guaranteed. Also, no support for
the connection procedure is provided.
Wireless LAN Interface Connection (Optional)
Check if the wireless LAN antenna (1) is attached to the printer.