SATO CL4NX User Manual

About This Manual
8
Before You Start
About This Manual
Thank you for purchasing this SATO CL4NX/CL6NX printer (hereafter referred to as "the printer").
This manual supplies basic information on how to operate the CL4NX/CL6NX. Read the manual
carefully to understand each function of CL4NX/CL6NX before operation.
Symbols
This operator manual uses following symbols:
Item Description
Warning
The Warning symbol indicates that you can cause death or serious injury
if you do not follow the instructions or procedures.
Caution
The Caution symbol indicates that you can cause injury or property
damage if you do not follow the instructions or procedures.
Note
The Note symbol indicates useful and supplemental information that you
should know.
Reference
The Reference symbol indicates the link of relevant information.
• Any unauthorized reproduction of the contents of this document, in part or whole, is
strictly prohibited.
• The content of this manual is subject to change without notice.
• The content of this manual has been produced with great care, but if you find any
doubt, error, or omission from the manual, contact your SATO reseller or technical
support center.
• The illustrations and screens in this manual are from CL4NX, if there are no
instructions.
• This manual uses the firmware of build version 1.8.1-r1 for description.

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g