[Printing] Menu
658
List of Initial Values
[Printing] Menu
The initial value refers to the setting value of the printer when it was shipped from the factory. If you
reset the printer, the setting values of the printer will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.
• Normally, it is not necessary to perform the initialization. Doing so will remove all the
customer settings.
Initial ValueSetting Item
CL4NX CL6NX
User
Reset
Factory
Reset
[Label Length]
203 dpi
20000 dots
305 dpi
18000 dots
609 dpi
9600 dots
203 dpi
20000 dots
305 dpi
18000 dots
Yes Yes
[Label Width]
203 dpi
832 dots
305 dpi
1248 dots
609 dpi
2496 dots
If [Head Base
Position] is [Standard]
203 dpi
1216 dots
305 dpi
1984 dots
If [Head Base
Position] is [Left-
justify]
203 dpi
1340 dots
305 dpi
2010 dots
Yes Yes
[Auto Measure] Disabled Yes Yes
[Ribbon] Use Ribbon Yes Yes
[Ribbon Near End] Enabled Yes Yes