[SBPL]
382
(When [AUTO] is selected in the [Protocol] menu)
• When [AUTO] is selected, a message prompting you to restart the printer will appear
on the Online/Offline screen. In such a case, reboot the printer to apply the settings.
• Once the printer language is fixed, the name of the printer language will appear on the
Online/Offline screen. The area to show the name of the printer language will remain
blank until the printer language is finalized.
The area remains blank until the
printer language is finalized.
When the print data has been sent in
SBPL.
• Printer language is finalized with the received print data.
• When [SBPL] > [Standard Code] in the [Applications] menu is disabled, the [Protocol]
setting will be changed to [SBPL].
[SBPL]
SBPL (Sato Barcode Printer Language) is the common command that controls SATO barcode label
printers.
To use SBPL as a printer command, set the following items:
Show Error
Enable or disable the command error indication.
Standard Code
Set the protocol code.