613
Printing RFID Tag Errors
If the recorded data on a tag is incomplete due to writing on a defective tag, the printer will print an
RFID tag error to the defective media. This function is to prevent the distribution of defective media
with a tag error.
When an RFID tag error occurs, the printer prints a slash and the error message, such as "WRITE
TAG ERROR" or "TAG NOT FOUND". The position to print the message and slash is set using the
specified media size command <A1>.
For a write error such as "WRITE TAG ERROR", the printer continues to print the first 16 or 32 bytes
of the write data.
The diagram below shows the message and slash printed on the position based on the media size
specified by the normal print.
WRITE TAG ERROR in RFID Write Command Read Error in UID/EPC/IDm Print Command
<TU> or TAG NOT FOUND Error
For other errors, the printer prints the error
message accordingly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
