SATO CL4NX User Manual

15
Precautions for Installation and Handling
Select a Safe Location
Printer operation can be affected by the printer environment.
Refer to the following instructions for installation and handling of the CL4NX/CL6NX printer.
• Place the printer on a surface that is flat and level.
If the surface is not flat and level, this may cause bad print quality. This may also cause a
malfunction and decrease the life span of the printer.
• Do not place the printer on a location that produces vibration.
Giving serious vibration or shock to the printer may cause a malfunction and shorten the life span
of the printer.
• Keep the printer out of high temperature and humidity.
Avoid locations subject to extreme or fast changes in temperature or humidity.
• Do not place the printer in a location subject to water or oil.
Water or oil entering inside the printer may cause a fire, electric shock or malfunction.
• Avoid dust.
Dust build up may result in bad print quality.
• Keep out of direct sunlight.
The printer has a built-in optical sensor. Exposure to direct sunlight will make the sensor less
responsive and may cause the media to be detected incorrectly. Close the top cover when
printing.
• Do not use in hazardous locations.
Do not use in a potentially explosive environment or atmosphere. Doing so could cause a fire of
explosion.

SATO CL4NX Specifications

General

Wi-Fi	No
Ethernet LAN	Yes
Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Maximum roll diameter	220 mm
Maximum printing width	104 mm
Printing media thickness	0.06 - 0.26 µm
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	271 mm
Height	321 mm
Weight	15000 g