661
[Interface] Menu
The initial value refers to the setting value of the printer when it was shipped from the factory. If you
reset the printer, the setting values of the printer will change back to the factory default values. The
table below shows the initial value of each setting item and type of reset that changes the value back
to the initial value.
• Normally, it is not necessary to perform the initialization. Doing so will remove all the
customer settings.
Initial ValueSetting Item
CL4NX CL6NX
User
Reset
Factory
Reset
[Network]
[Settings]
[LAN]
[IPv4]
[Mode] DHCP Yes/
Interface
Yes/
Interface
[DHCP] - - -
[IP Address] 0.0.0.0 Yes/
Interface
Yes/
Interface
[Netmask] 255.255.255.0 Yes/
Interface
Yes/
Interface
[Gateway] 0.0.0.0 Yes/
Interface
Yes/
Interface
[DNS] 0.0.0.0 Yes/
Interface
Yes/
Interface
[IPv6]
[Mode] Disable Yes/
Interface
Yes/
Interface
[DHCP] - - -
[IP Address] :: Yes/
Interface
Yes/
Interface
[Prefix Length] 64 Yes/
Interface
Yes/
Interface
[Gateway] :: Yes/
Interface
Yes/
Interface