Siemens SIMOCODE pro User Manual

Introduction
1.4 Supported control functions
SIMOCODE pro PCS 7 Library V9.0
12 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
1.4
Supported control functions
The library supports all SIMOCODE pro control functions. Motor blocks of the Advanced
Process Library (APL) are used for this. For control functions that are not supported by the
APL motor blocks (two directions of rotation, two speeds), the library contains the block
MMRevDhl.
For communication with the SIMOCODE pro device, the channel block FbSwtMMS from the
APL is used.
Device-specific functions that do not belong to the standard of the APL motor blocks are
provided by the other blocks of the SIMOCODE pro Library.
The SIMOCODE pro library V9.0 supports the following control functions:
Table 1- 1 Supported control functions
Control function
SIMOCODE
pro C
SIMOCODE
pro S
SIMOCODE
pro V
Overload relay
X
X
X
Direct starter X X X
Reversing starter
X
X
X
Circuit breaker
X
X
X
Star-delta starter
–
X
X
Star-delta reversing starter
–
–
X
Dahlander
–
–
X
Dahlander reversing starter
–
–
X
Pole-changing starter
–
–
X
Pole-changing reversing starter
–
–
X
Valve
–
–
X
Positioners 1–5
–
–
X
Soft starter
–
X
X
Soft reversing starter
–
–
X

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English