Description of the blocks
4.6 Block for timestamping MMLog
SIMOCODE pro PCS 7 Library V9.0
188 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
The following application is only available for SIMOCODE pro PROFIBUS devices (Slv_Typ
= 0
).
Signal messages and special messages
SIMOCODE detects three message buffers: DS12, DS13, and DS14. Each of these data
sets has 180 bytes to contain 16 messages.
Table 4- 84 Assignment
Signal message or special message 1
12.0 Signal message or special message 2 12 bytes
Signal message or special message 3
Signal message or special message 16
Structure of a signal message
Table 4- 85 Signal message assignment
IDs (important for SIMOCODE-III)
0.0 Slot number of mod-
Byte[1] 0x01: DPV1 slot model
1.0 Channel number of
Byte[1] 0x00 .. 0x07: Number of timestamping - Input
2.0 Signal status Byte[1] Bit 7:
1 = input signal = rising edge
0 = output signal = falling edge
Bit 6:
4.0 Time Byte[8] Bit 0:
1 = Clock is synchronized,
0 = Clock is not synchronized
Up to 8 signal messages can be configured via SIMOCODE ES or EDD. To display the
signal messages, the timestamping must be activated in SIMOCODE ES or EDD.
To Next Page
Loading...
Need help?
General
