Siemens SIMOCODE pro User Manual

Block icons and faceplate views
3.2 Faceplates
SIMOCODE pro PCS 7 Library V9.0
62 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
3.2.3 Views
3.2.3.1 Batch view
The "Batch" view is available in the MMRevDhl, MMOprtn, MMStat, MMMeas and MMLog
blocks.
Batch view
This area shows a display of the batch that is currently running (Batchview).
You can use the internal tag "@APLBatchEnable" to enable/disable the "Batch" button in the
toolbar.
Value of @APLBatchEnable Operating the "Batch" button in the
toolbar
Icon of the "Batch" button in the toolbar
0 Disabled
1* Enabled
*Batch ID has to be greater than 0 for Batch to be enabled.
① Enabled
(BatchEn)
This area shows you if the block is enabled for operation via SIMATIC BATCH
(Status1.Bit1)
② Allocated
(Occupied)
This area shows if the block is currently in use by SIMATIC BATCH
(Status1.Bit0)
③ Batch name
(BatchName)
This area shows the name of the batch that is currently running
④ Batch ID
(BatchID)
This area shows the identification number of the batch that is currently running
(BatchID).
The batch view is disabled if
BatchID = 16#00000000.
⑤ Batch step
(StepNo)
This area shows the step number of the batch that is currently running.

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English