Siemens SIMOCODE pro User Manual

SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
283
Technical Data
B
Table B- 1 Memory space requirements and called blocks per block type for SIMOCODE pro PCS 7 Library V9.0
Block
1
No.
2
Length of
block in the
load
memory, in
bytes
3
Length of
block in the
work memory,
in bytes
3
Length of
instance data
in the load
memory, in
bytes
4
Length of
instance data
in the work
memory, in
bytes
4
Temporary
memory, in
bytes
5
Blocks
called
6
MMDiag FB1300 8736 7368 1602 468 198 FC369,
SFC51,
SFC6,
SFC64
MMOprtn FB1301 21680 18286 3834 1424 454 FC369,
SFC13,
SFC6,
SFC64,
SFC20
MMMeas FB1302 18826 16362 2494 1050 166 FC369,
SFC6,
SFC64,
SFC20
MMStat FB1303 6302 5090 1918 846 86 FC369,
SFC6,
SFC20
MMLog FB1304 19362 17192 4036 2400 216 FC369,
SFC6,
SFC20
MMRevDhl FB1305 26728 24234 2734 920 110 FC369,
SFC6,
SFC20
1
The symbolic designator in the symbol table of the library for the respective function block (FB). It must be unique within
the project.
2
Consists of the type of block (FB) and the number.
3
Memory requirement of program code, once per block type
4
Memory requirement for an instance data block.
5
The memory required for the local data when the block is called in an execution level. This is limited according to the
specific CPU. If this amount is exceeded, you must check the setting in the CPU configuration and redistribute it among
the organization blocks based on the actual requirement.
6
The relevant driver block uses these blocks. They are now located in the user program. They are stored in the same
library.

Siemens SIMOCODE pro Specifications

General

Brand	Siemens
Model	SIMOCODE pro
Category	Control Unit
Language	English